CLA-Val Pressure Relief Valve,Cla-Val NGE90-01, Cla-Val 50-01, Cla-val 52-01, CLA-Val Float Control Valve 624-01, CLA-Val CF1-C1 Float Control 89016-00, CLA-VAL 340AF Adapter, CLA-VAL 33A

CLA-VAL PRV 50-01.png

50-01 & 650-01 Pressure Relief, Pressure Sustaining Valve

[50-01 & 650-01]

Cla-Val Models 50-01 and 650-01 Pressure Relief Valves are hydraulically operated, pilot-controlled, modulating valves designed to maintain constant upstream pressure within close limits. Model 50-01 is the full port version of the valve. Model 650-01 is the reduced port version of the valve. Both are ideal for pressure relief, pressure sustaining, backpressure, or unloading functions in a by-pass system.

Pressure Sustaining Service

Pressure Relief Service

CLA-VAL PRV 52-01.png

CLA-Val 52-01 & 652-01 Pressure Relief &Surge Anticipator Valve

[52-01 & 652-01]

Cla-Val Models 52-01 and 652-01 Surge Anticipator Valves are indispensable for protecting pumps, pumping equipment and all applicable pipelines from dangerous pressure surges caused by rapid changes of flow velocity within a pipeline.

When using these valves, pumping systems are started and stopped gradually preventing harmful surges from occurring. 

CLA-VAL CBP 658-01.png

CLA-Val 58-01 & 658-01 Combination Back Pressure and Solenoid Shut-Off Valve

[58-01 & 658-01]

Cla-Val Models 58-01 and 658-01 valves perform two separate functions. They maintain a constant backpressure by discharging excess pressure downstream and when the solenoid is activated, close drip-tight.

When inlet pressure is greater than the control setting, the valve opens. When inlet pressure is equal to the control setting, the pilot modulates the valve, maintaining the preselected backpressure. When inlet pressure is less than the control setting, the pilot system closes the valve drip tight. 

CLA-VAL Hytro; Valve 100-01.png

CLA-Val 100-01 Hytrol Valve

[100-01]

The Model 100-01 is the basic valve used in nearly all Cla-Val Automatic control valves. it is the valve of choice for system applications requiring remote control, pressure regulation, solenoid operation, rate of flow control, liquid level control or check valve operation.

This valve meets Drinking Water System Components - Health Effects Standard.  Cla-Val Model 100-01 also meets the requirements for lead content in drinking water products, encompassing the requirements in California AB1953 and Vermont 9 VSA Chapter 63, Subsection 1C. 

CLA-VAL Hytrol Valve 100-200.png

CLA-Val 100-20 600 Series Hytrol Valve

[100-20]

The reduced cavitation characteristics of the 100-20 Hytrol Valve are the basis for the Cla-Val 600 Series. The rugged simplicity of design and packless construction assure a long life of dependable, trouble-free operation. Its smooth flow passages and fully guided disc and diaphragm assembly assure optimum control when used in piping systems requiring remote control, pressure regulation, solenoid operation, rate of flow control or check valve operation.

CLA Float Valve 624-01.png

CLA-Val 624-01 Float Control Valve

Cla-Val 124-01 and 624-01 Float Valves are non-modulating valves that accurately controls the liquid level in tanks. These valves are designed to open fully when the liquid level reaches a pre-set low point and close drip-tight when the level reaches a pre-set high point.

Level settings can be as much as eleven and one half feet below the valve. The float mechanism may be located remotely from the main valve. See the technical data sheet on Model CF1-C1 Float Control for additional information.
  • Accurate and Repeatable Level Control
  • On-Off or Non-Modulating Action
  • Fully Adjustable High and Low Level Settings
  • Simple Design, Proven Reliable
  • Easy Installation and Maintenance

CLA-Val CF1-C1 Float Control.png

CLA-Val CF1-C1 Float Control 89016-00

  • Accurate Liquid Level Control
  • Fully Hydraulic Operation
  • Simple Design, Easy Maintenance
  • No Lubrication Necessary
  • No Gears, No Mechanical Linkage Between Valve and Control 

CLA-VAL NGE90-01.jpg

Pressure Reducing Valve NGE Series Model: NGE90-01
  • Sensitive and Accurate Pressure Control
  • Easy Adjustment and Maintenance
  • Tamper Resistant
  • Fully Supported Frictionless Diaphragm

The Cla-Val NGE, GE & AE series Pressure Reducing Valve automatically reduces a higher inlet pressure to a steady lower downstream pressure regardless of changing flow rate and/ or varying inlet pressure. This valve is an accurate, pilot-operated regulator capable of holding downstream pressure to a pre-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip tight.

CLA-VAL 340AF Adapter.jpg

CLA-VAL 340AF Pressure Fuel Servicing Adapter

• Conforms to MS24484-5 • Durable High-Strength Stainless Steel Body • Body, Poppet and Spider are Precision Cast • Long Wearing Fluorosilicone Seal The Cla-Val Model 340AF Pressure Fuel Servicing Adapter mates with both underwing fuelling nozzles and hydrant couplers. The adapter is designed for the delivery of pressurized fuel to both refueling tank trucks and fueling support vehicles, hydrant systems, fixed pipework fueling facilities and Tank Farms. The design and construction of the Cla-Val 340AF Adapter conform to MIL-A-25896 and MS24484-5. To ensure maximum strength and durability, the Cla-Val 340AF Adapter is constructed of high-strength stainless steel and aluminum. The adapter body, poppet assembly, and spider are precision investment cast for a long service life under high-usage conditions. A Fluorosilicone seal bonded to the poppet provides drip-tight sealing throughout the adapter’s specified temperature range.

CLA-VAL 33A Series.jpg

CLA-VAL Series 33A

Sizes 1" - 2" - 3" - 4" - 6"

High Performance Combination Air Release & Vacuum Breaker Valve